This is the complete technical reference for PanelDeals' PVC wall panel range. Use it for tender packs, building control submissions, fire-safety reviews, project specifications, and bulk-order planning. All data is for guidance and the latest spec sheets are available on request — contact us for project-specific certifications.

Dimensions across the range

Format Length Width Thickness Coverage / panel Typical use
Wide-panel 10mm 2400mm 1000mm 10mm 2.4 m² Bathroom walls, splashbacks
Wide-panel 8mm 2400mm 1000mm 8mm 2.4 m² Bathroom walls (lighter grade)
Tongue-and-groove 8mm 2600mm 250mm 8mm 0.65 m² Caravans, awkward angles
Tongue-and-groove 5mm 2600mm 250mm 5mm 0.65 m² Lightweight, budget jobs
Kitchen splashback 10mm 2400mm 1000mm 10mm 2.4 m² Behind hobs, full splashbacks
Ceiling 8mm 2600mm 250mm 8mm 0.65 m² Bathroom & kitchen ceilings

Material composition

Component Detail
Base material Rigid PVC (polyvinyl chloride)
Core structure Hollow honeycomb (5mm/8mm) or solid (10mm)
Surface finish UV-printed decorative layer + protective topcoat
Edge profile Square edge (wide-panels) or tongue-and-groove (250mm panels)
Water absorption 0% (non-porous)
UV stability Stabilised; no visible yellowing in indoor use
Heat tolerance Stable to ~70°C

Fire ratings

Grade Standard UK building reg suitability
10mm wide-panel + 10mm splashback Class 1 to BS 476-7 Most residential walls; behind hobs (with appliance clearance)
8mm wide-panel + 8mm tongue-and-groove + 8mm ceiling Class 1 to BS 476-7 Most residential walls and ceilings
5mm tongue-and-groove Class 3 Non-escape-route residential

Note for commercial / public buildings: escape routes typically require Class 0 (Class 1 + BS 476-6 propagation). Standard residential PVC panels may not meet Class 0. Get a fire-safety review for any commercial project. Read the full UK fire-rating guide.

Install standards

Method Substrate Adhesive Sealing
Direct fix to plaster Sound, dry, level plaster Solvent-free panel adhesive Mould-resistant silicone at corners and floor
Over existing tiles Sound tiles + sand or prime Solvent-free panel adhesive Mould-resistant silicone
Over PIR + plasterboard (loft, new-build) Finished plasterboard Grab adhesive Standard silicone seal
Over timber battens Battens at 600mm centres Adhesive plus optional screws Standard

Compatible trims and accessories

  • Internal corner trims (Black, White, Silver) — 5mm, 8mm, 10mm
  • External corner trims — same finishes/thicknesses
  • End cap trims for exposed edges
  • Joint bar trims (between two panels on same wall)
  • Coving trims (wall-to-ceiling joint)

All trims must match panel thickness exactly. View trim range.

Care & maintenance specification

  • Daily: Wipe water off in shower areas to prevent limescale
  • Weekly: Mild detergent + microfibre cloth
  • Avoid: Abrasive scourers, neat bleach, solvents
  • Limescale: 50/50 white vinegar + warm water
  • Mould on silicone: Renew silicone every 5–10 years

Sustainability and disposal

  • PVC is recyclable through specialist plastic recycling streams
  • Panels do not biodegrade in landfill
  • End-of-life: contact local waste authority for plastic recycling options
  • Reusable in many cases — panels removed carefully can be re-fitted elsewhere

Warranty and certifications available

  • Standard manufacturer warranty against material defects
  • BS 476-7 fire test certificates available on request
  • EN 13501 reaction-to-fire data available for trade orders
  • Environmental product declaration (EPD) on request for tender packs

Trade and project specification

For multi-unit specifications, MMC volume orders, fire compliance documentation, and tender pack support, see our trade account page or contact us with project details. We supply CAD blocks, BIM objects, and material schedules on request.

Contact: service@paneldeals.co.uk with subject "PVC Specification Request".

Browse the range

PVC Wall Panels · Kitchen Splashbacks · PVC Ceiling Panels · Trims