100% Waterproof · Fits Over Existing Tiles · Nationwide Delivery
White Gloss PVC wall panels in a modern bathroom
Bathroom & Shower · PVC Wall Panels

Waterproof PVC Bathroom & Shower Wall Panels — the tile alternative.

No grout. No mould. No mess. 100% waterproof panels that fit straight over your existing tiles — a full bathroom in a weekend.
100% Waterproof
Ideal for wet rooms, showers & splash zones
Grout-Free Forever
No black mould lines · no re-grouting
Fits Over Tiles
No demolition · no waste skip · no fuss
Fitted in a Weekend
Cuts with a handsaw · sticks with grab adhesive
No Grout, No Mould
Sealed tongue-and-groove joints — zero grout lines
Fully Waterproof
Water can't pass through PVC — wet rooms welcome
Fits Over Tiles
Panel straight onto existing sound tiles
Wipe-Clean Surface
Warm soapy water and a soft cloth — that's it
The Tile Alternative

Skip the tiler. Skip the grout. Panel a bathroom in a weekend.

Tiled bathrooms look great — for about six months. Then the grout goes grey, the corners go black, and you're on your knees with a toothbrush and bleach. PVC bathroom wall panels solve the whole problem. Waterproof from front to back, joined with locking tongue-and-groove edges, no grout to fail. And because they can fit straight over your existing tiles, there's no hacking off, no dust, no skip in the driveway.

A full wet-room wall is 3–4 panels. A shower enclosure is 4 panels. One day to prep and fit, another to trim and seal — that's a bathroom transformed for less than the tiles alone would have cost. Full step-by-step in our PVC Install Guide.

Panel size guide

Wide format or slat pack — choose the right size for your wall.

Bathroom panels come in two main formats. Pick by wall size, storage space and how visible you want the joins to be.
Wide format · 10mm
1000mm × 2400mm
The big-panel option. Each panel covers 2.4 m² — a full wet-room wall in just 3–4 panels. Minimal joins for a seamless, hotel-suite look.
Best for: full shower walls, wet rooms, bath surrounds, main bathrooms
Slat format · 5mm / 8mm
250mm × 2600mm
Slim slat-style panels sold in 4, 8 or 10-panel packs. Lighter, easier to carry through doorways, and easier to work around awkward corners and reveals.
Best for: cloakrooms, en-suites, tight corners, over-tile refits
Not sure how many you need? Use our free Panel Calculator — enter your wall dimensions, get the exact panel and trim count in 30 seconds.
How It Works

Bare wall to finished bathroom, in four steps

01
Prep the wall
Clean, degrease, check level, dry fully. Panels fit over sound tiles too.
02
Cut to size
Fine-tooth handsaw or utility knife. Full technique in our Cutting Guide.
03
Fix & slot together
Grab adhesive on the back, press against the wall, slot the next panel's tongue into the groove.
04
Seal the edges
Sanitary-grade silicone at every worktop, tray, floor and ceiling joint. Watertight in 24 hours.
Full step-by-step install guide
Tools list, 7-step method, tricky bits, common mistakes.
Read the Install Guide
Complete The Project

Trims for a professional finish

Every trim available in Black, White or Chrome, in 5mm, 8mm and 10mm to match your panel thickness.
Frequently Asked Questions

Bathroom install — what people ask most.

Can I fit PVC panels over my existing bathroom tiles?

Yes, provided the tiles are clean, degreased, firmly bonded (no loose or hollow tiles), and reasonably level. Fill grout lines deeper than 3mm with filler for a flat bed. This is one of the biggest reasons people choose panels over new tiles — no demolition, no dust, no skip.

Are PVC panels really 100% waterproof?

Yes — water cannot pass through PVC. The tongue-and-groove joints between panels lock together to form a continuous sealed surface. The only place water could get in is at the panel edges (top, bottom, and where the panel meets baths, showers, worktops) — which is why sanitary-grade silicone sealant at those boundaries is essential.

What panel size should I choose — 1000mm or 250mm?

The wide-format 1000×2400mm panels give the cleanest finish with the fewest joins — best for main bathrooms and shower cubicles. The 250×2600mm slat-format packs are lighter and easier to carry through narrow doorways or up stairs, and easier to work with in tight cloakrooms.

How long does a bathroom take to panel?

A single wet-wall (behind a shower or bath) is typically 3–4 hours from start to sealant. A full four-wall bathroom is a weekend — day one prep and panel, day two trims, sealant and drying.

Which thickness is right for a bathroom — 5mm, 8mm or 10mm?

5mm for cloakrooms and areas where impact is low. 8mm for general bathrooms. 10mm for wet rooms, shower cubicles and heavy-use family bathrooms — more rigid, more impact resistant, and gives you the flattest finish over uneven walls.

Do you offer free samples?

Yes — order our free sample pack. Delivered free to UK addresses so you can see and feel the textures before committing.

PanelDeals
Waterproof. Grout-free. No mould.
Transform your bathroom this weekend · Nationwide delivery · Free help on 020 4634 5400
Shop PVC Bathroom Panels
www.paneldeals.co.uk

PanelDeals