The clean ceiling-to-wall transition

The PVC Wall Panel Coving Trim bridges the joint between the top of your wall panels and the ceiling. Without coving, panels stop with a visible cut edge against the ceiling — functional but unfinished. Coving covers that gap, masks any imperfect ceiling line, and provides a watertight seal in wet areas.

What it does

• Bridges the wall-to-ceiling joint with a small concave curve
• Hides imperfect ceiling lines — most UK ceilings aren't perfectly flat
• Watertight seal in bathroom installations
• Decorative finish — reads as deliberate, professional, traditional
• Black, White, Silver options
• 5mm, 8mm, 10mm thicknesses

Where to use

• Top edge of full-height bathroom or shower-room panels
• Where panels meet an Artex'd or textured ceiling (covers the imperfect line)
• Tongue-and-groove panel installs running floor-to-ceiling
• Anywhere you want a softer, more traditional look at the ceiling line

When to use coving vs end cap

• Coving: when panels go all the way up to the ceiling
• End cap: when panels stop short of the ceiling (e.g. half-height panelling)

Specifications

• Length: 2400mm or 2600mm
• Profile: Concave curve transitioning from wall to ceiling
• Material: PVC
• Thickness: 5mm, 8mm, 10mm — match your panel
• Colour: Black, White, Silver

How much do I need?

Total linear length of panels meeting the ceiling. A typical UK bathroom (4 walls, 2.4m wide each) needs around 9.6m of coving — 4 lengths of 2400mm.

Install

1. Cut the coving to length with a fine-tooth saw, mitring corners at 45° to meet at internal corners
2. Apply grab adhesive to the back of the coving
3. Press into position against both wall and ceiling
4. Hold for 30 seconds, then run a silicone bead along the visible joint between coving and ceiling for waterproofing

FAQs

How do I cut a 45° mitre?
Use a mitre saw or a mitre block with a fine-tooth saw. Practice on a scrap end first.

What if my ceiling isn't flat?
That's exactly what coving is best at hiding. Apply slightly extra adhesive, press into the ceiling line as best as possible, and silicone any visible gap.

Can I paint coving to match my ceiling?
White coving is best left white. PVC accepts paint poorly without a primer — better to choose a coving colour that matches the ceiling rather than painting.

Is it suitable for wet areas?
Yes — PVC coving is fully waterproof. Always silicone the joint to the ceiling for full water-tightness.

Pair with

Internal corner trim · External corner trim · End cap trim · PVC ceiling panels